Mineral Insulated RTD / Thermocouple With Plug Connector
Termination
Product Description:
Resistance temperature detectors (RTD) accurately sense temperature
with an excellent degree of repeatability and interchangeability of
elements. The RTD is composed of certain metallic elements whose
change in resistance is a function of temperature. In operation, a
small excitation current is passed across the element, and the
voltage, which is proportional to resistance, is then measured and
converted to units of temperature calibration. The RTD element is
manufactured by winding a wire (wire wound elements) or plating a
film (thin film elements) on a ceramic or glass core and sealing
the element within a ceramic or glass capsule.
Mineral insulated RTD with plug connector termination features a quick disconnect connector that allows for connection to
leads. The connector is available in 3 pin standard size and
miniature configuration and is rated to 200°C. Compression fittings are available for securing probe. The sheath material is 316
stainless steel and is rated to 500°F (260°C).
Specification:
Probe Outside Diameter | 3mm, 4mm, 5mm,6mm |
RTD Element Type | 1xPt100 2xPt100 1xPt1000 2xPt1000 |
RTD wire connection | 2 wire configuration 3 wire configuration 4 wire configuration
|
Wire Description | 24 Gage Stranded Stainless Steel Braid Flexible Armor Cable 24 Gage Stranded Fiberglass Cable 24 Gage Stranded Cable |
Termination type | 90mm split leads and Bare Ends. 90mm split leads and spade lugs. Standard Male Plug (2 & 3 wire configuration only) Standard Female Jack(2 & 3 wire configuration only) Mini Male Plug(2 & 3 wire configuration only) Mini Female Jack(2 & 3 wire configuration only) |
Feature:
Temperature range -328 °F (-200 °C) thru +1562 °F (+850 °C)
Standard temperature rated for use up to 1112 °F (600 °C)
Rigid and bendable sheaths
® coated probes available
Elements 100 or 1000 ohm, Class A (0.06%) or B (0.12%)
Curve European 100 ohms @ 0 °C= 0.00385 ohms/ohm/degree C
Curve American 100 ohms @ 0 °C =0.00392 ohms/ohm/degree C
Thin-film or wire-wound, Platinum, Nickel or Copper
Sheath Diameter: 3mm, 4mm, 5mm,6mm
Sheath length: there is no upper limit on sheath length. The
minimum practical length is 2 inches.
Lead configurations: 2, 3 & 4-wire, single + dual element
Quick disconnects standard & custom
Enclosures: standard and explosion proof
Transmitters: Isolated 4-20 mA, DIN rail and head mount, standard &
explosion proof.
Thermowells
Application:
The Metric Tube And Wire General Purpose RTD Pt100 has been
designed to be used in below area,
Automotive, engine test cells
Co-Energy, solar, coal-gasification, fossil fuel, & nuclear
Fuel cells
Food & Beverage
Ovens & Chillers
Industrial processes
Medical
Pharmaceuticals
Chemical & Petrochemical
R&D
