Mini Size Cartridge Heaters 220V 350W OD 5.9 x 100mm Outside
Connection
1. Description
A cartridge heater is a device that is usually tubular and is
inserted into drilled holes of metal blocks for heating.
Cartridge heater is cylindrical electrical heating elements.
Protected with a stainless steel sheath, their watt density can
reach 25 W/cm2 and their operating temperature can go up to 800°C
(1472°F)
Cartridge heater is one of the electric heating elements, which is
widely used in industry mould heating. Compared with the same
heating element of high thermal, cartridge heater can save 5% of
electric materials, and heat efficiency can reach 90%.
Mostly, cartridge heater is used for heating solids such as
injection presses heating plates or various tools, it can also be
used for heating up water of gases under certain conditions. Widely
used for manufacturing plastic and rubber parts in the car industry
or in the food processing industry, etc . Cartridge heaters are
also commonly found in the chemical, electronics, medical
equipment, packing and nuclear industries
The majority of applications do not require maximum watt/in². Use a
watt density only as high as needed. Take advantage of the safety
margin provided by using ratings less than the maximum allowed.
Select space heaters for most even heat pattern rather than the
highest possible wattage per heater
| Resistance wire | NiCr20/80 |
| Material | stainless steel 304,321,316, Incoloy 800, Incoloy 840 |
| Maximum Temperature | 800°C |
| Standard cold length at lead exit | 0.375" |
| Standard cold length at disc end | 0.25" |
| Thermocouple | K or J |
| Cable wire | silicone wire, metal wire, fiberglass wire, etc |
| Flange/thread | M12, M14, M16, 1", 1 1/4", 1 1/2", 2",etc |
| Diameter | 5.9mm |
| Voltage | 220V |
| Wattage | 350W |
| Water proof | IP65 |
2. Applications
1. Cartridge heater applied in mold heating has been very popular
2. Heating system in plastic machinery.
3. Pharmaceutical production
4. Heat Treatment Lab
5. Chemical industry and so on
3. Competitive Advantage
1. We manufacture high density cartridge heaters; Minimum diameter
can reach 2.6mm.
2. All lead wires are pure nickel
3. Insulating material can be resistant to the high temperature of
400 degree.
4. Our product can meet IP65 waterproof
5. We produce cartridge heater with distributed wattage.
4. Delivery
